Guest Operations
Guest Operations is where the front office and guest service work: checking guests in and out, watching each room's TVs, and handling the requests guests send from their phones.
Open the console and pick a screen under Guest Operations in the menu. You need the Operations area β see Areas and roles. Every screen updates live; there is no need to refresh.
Rooms
The Rooms screen shows every room in one list: the guest, housekeeping (Do not disturb, Make up room, Skip the clean β set it right in the list), the TV (On, Screen off, Offline, No TV β with On/Off and β» restart right in the row), the temperature with its setpoint, the lights on, and the curtains β with Check in or Check out at the end of the row. A PMS guest shows by the first letter only (P***). Housekeeping and the device columns appear only with Room devices in the site's service package. The device values are what the IoT service last read; Read devices reads all rooms again.
- Show: All, In house, Vacant, Make up room, Do not disturb and Problems (a TV offline, a room that could not be read, or a temperature 2 Β°C or more from its setpoint).
- βΎ at the end of a row works the room without leaving the list: check in or out, set the courtesy panel (Nothing, Make up room, Do not disturb, Skip the clean), and the room's devices β change the temperature here β lights, curtain, thermostat, sensor β read again every 8 seconds while the row is open. The devices are the same list as in IoT Manager, one per line in the room's order, with each block's On / Off and Brightness for all its devices at once (see the room detail). Every device's raw values and tests are in IoT Manager β Live rooms.
- Search by room number or guest name. Press a room number to open the room detail.
Room detail
The room detail puts one room on one screen: the guest, the TV with its power buttons, and every device of the room β lights, curtain, courtesy panel, thermostat, and the occupancy sensor β read again every 8 seconds while the screen is open. The devices are listed as in IoT Manager β Live rooms: one device per line, in the order set there, and devices with the same first tag gathered in a block (Bedside Lamps, Main lights) whose On / Off and Brightness move all of them at once. The order, names and tags are changed only in IoT Manager; disabled devices are not shown. The device controls are the same as in IoT Manager: brightness is sent when you let go of the slider, the thermostat moves in half degrees, and the courtesy panel takes Off, MUR, DND or STC. You need the Operations or Devices area at Operator or above to send commands.
Under the guest, Guest's settings lists the guest's own values β the temperature, curtains, lights on arrival and scent they chose before arrival, or set later in the app or with the room's own panel and switches β with where each came from. These are applied at check-in and when the guest is moved to another room, and nothing overrides them automatically. A change you make from this screen is not counted as the guest's.
A banner says whether the devices are Simulated or Live. In a live room a command moves real equipment β see Simulated and live.
Reading a room's TVs
| Indicator | Meaning |
|---|---|
| π’ On | The TV is online and its screen is on |
| π‘ Screen off | The TV is online; the screen is off but the TV is still running |
| βͺ Offline | The TV has not reported in for more than about a minute |
| No TV | No TV is registered to the room |
A TV reports its status every 30 seconds. If it misses a little over two reports in a row, it is shown as Offline and its buttons are disabled. Common causes are a TV that is unplugged, a network problem in the room, or a TV switched off at the wall.
Turning a screen off and on
Use the On, Off, and Reboot buttons next to the TV.
- Off turns the screen off. The TV keeps running in the background, so it stays online and you can turn it back on from here.
- On turns the screen back on.
- Reboot restarts the TV. It shows as Offline for a short time and then comes back.
Why "Off" does not cut the power: a TV that is fully powered down cannot be reached over the network, so it could not be turned back on remotely. Turning only the screen off keeps the TV reachable. This relies on the
instant_powersetting in the TV Preset β it must stay at2.
Check-in
Press Check in on a vacant room.
- If the guest has a reservation made in Reservations, pick it under Reservation β the name, language come from it, and the guest's app link starts working as the room app. Otherwise leave it on No reservation (walk-in) and:
- Enter the guest's name and pick their language (English, Korean, Chinese and more). The TV and the guest's phone app show that language.
- Press Check in.
The TV and phone keep the room's template β the one set for the room or its room type in Features & rooms. Checking in or out does not change it, so the room looks the same before and during the stay.
Every check-in β from a reservation, a walk-in, or the PMS β has a stay with its own app link.
The guest's choices are applied. If the guest chose how the room should be on arrival (temperature, curtains, lights, scent β see Reservations), the room's devices are set that way right after check-in, and the notice says guest settings applied. A walk-in has no choices, so nothing changes. Requests the guest made for their arrival now show the room number in Requests.
The guest is registered to the room, the room is marked as occupied, and the TV prepares a clean state for the stay and restarts. The TV greets the guest by name. Checking in a room that already has a guest ends the earlier stay first.
Logins stay while the guest stays. At check-in the TV is told to keep the guest's personal data β the
Netflix, YouTube or Amazon accounts they sign in to β even when the TV is switched off at night (the IDCAP property
security_level is set to 2). At check-out it is set back to 1, so that data is deleted when the TV
turns off and the next guest starts clean. A TV also sets this by itself when it starts, from whether the room has a
guest, so a missed command is corrected.
Check-ins can also come from the hotel's property management system (PMS) once it is connected: the same stay β name, language, reservation number β arrives by API and goes through the same steps as pressing Check in. Two check-ins with the same reservation number are one guest.
Check-out
Press Check out on the room and confirm.
The guest's stay is closed, the room is marked vacant, the guest's phone is
disconnected from the TV, and the TV restores the clean state prepared at
check-in β clearing the guest's viewing history and data β and then turns off (the IDCAP power command powerOff:
the TV restarts into standby with the screen off, and the hotel app keeps running so the TV can be switched on again from
the console). The TV's security_level goes back to 1 first, so the guest's app logins are deleted when the TV turns off.
The next check-in switches the screen on again before the TV restarts for the new guest.
If the room has devices, they are reset too, so the next guest does not find the previous guest's settings: Do Not Disturb, Make Up Room and Skip the Clean are switched off, all lights go off, and the thermostat returns to 22.5 Β°C with the fan on Auto. Curtains are left as they are. If a device could not be reset, the confirmation says so β check the room under IoT Manager β Live rooms. Each reset command appears in the room's command history marked check-out.
Check-out also ends the guest's phone access for good: the phone can no longer control the TV, change room settings, or send requests for that room. Personal information is deleted: the guest's name and language on the stay and the guest record, their pre-arrival choices, the notes of their service requests, and their name in the integration log. The app link then shows only You have checked out for 24 hours and stops working. (The PMS keeps its own copy β this deletes ours.) The next guest pairs with a new code. If the TV cleared its own data while restarting, it reconnects to the room by itself within 15 minutes (see Re-link).
Reservations
Reservations lists the stays: booked, in house, and those that ended in the last 24 hours. Each stay has one app
link for the guest β https://pcr-guest.pages.dev/s/β¦ β that changes with the stay:
| Stay | The link opens |
|---|---|
| Booked | A welcome page: the dates, the room type (its description and amenities β not the room number), and the hotel information |
| In house | The room app itself β TV remote, room controls, services β with no code to scan |
| Checked out / Canceled | Only You have checked out (or canceled), for 24 hours; then the link stops working |
Guest's choices shows what the guest wants: the room settings they chose before arrival β and, once in house, the latest ones they changed in the app (these follow the guest to a new room if they are moved) β and their requests for arrival. Settings changed from the console's room detail are not counted as the guest's. Choices are deleted at check-out.
The console does not send emails. From β― on a stay:
- Copy link β the link alone.
- Copy email button β a small HTML button ("Open your room app", in the guest's language) to paste into the PMS's confirmation email or the hotel's own message.
- Phones (n) β the phones on the stay (up to 5): those that opened the link and those that scanned the TV's QR code or typed its code in the room. Disconnect one that should not be there.
- New link β when the link went to the wrong person: the old link stops at once and its phones are disconnected. Send the new one.
Guest names and privacy. A reservation that comes from a PMS keeps no guest name in the console β it is shown by its first letter only (P***) with its PMS reservation number. While the guest is in house the name is kept only for the TV to greet them, and it is deleted at check-out; the integration log never records names. Reservations made here (Reserve, a local PMS) and walk-ins keep the name you type.
With a PMS (Apaleo), reservations appear here by themselves as soon as the PMS confirms them; a cancellation or no-show closes the stay. Without a PMS, press Reserve: guest name, arrival, departure, room type, language and language. This is not a PMS β there is no editing of dates here; delete a wrong reservation and reserve again. Check the guest in from Rooms by picking the reservation β or let the hotel check guests in and out automatically every day at set times (Settings β Integrations β PMS). The Room column of a reservation that is waiting lets you give it a room (rooms of its type first): the automatic check-in puts the guest there. Left empty (Any vacant), it takes a vacant room of the type. Giving a room that another reservation has for the same nights is allowed but you are told β the first to arrive gets it.
Housekeeping
The Housekeeping column of Rooms is the room's courtesy panel, as the IoT service last read it. Pick a level in the column to change it:
| Level | Meaning |
|---|---|
| Nothing | No request |
| Make up room | The guest asks for cleaning |
| Do not disturb | The guest does not want visitors |
| Skip the clean | No cleaning today |
Turning one level on switches the others off. Show β Make up room Β· Do not disturb Β· Skip the clean lists the rooms with that level, with how many there are. The column and those filters appear only when rooms have a courtesy panel connected over IoT; a room without one shows β. Changing the level needs the Operations or Devices area at Operator.
Requests
Open Requests. Requests that guests send from their phones appear here immediately.
Each request moves through these steps:
| Status | What to do |
|---|---|
| Pending | New request. Press Start when someone takes it. |
| In progress | Being handled. Press Done when it is finished. |
| Done | Completed. |
| Cancelled | Press Cancel on a pending or in-progress request if it will not be handled. |
A request marked Arriving was made before check-in from the guest's app link (a late check-out, flowersβ¦): prepare it for the guest's arrival. It gets the room number at check-in. If the reservation is canceled, it is cancelled too.
Use Show at the top to switch between active requests, completed ones, and all of them. You can also create a request on a guest's behalf with New request β for example after a phone call from the room. The services guests can request are managed in Services.