Setting up a site

A new site is set up once for a pilot room, and then the same steps are repeated cheaply for every other room of the same kind. The console is split into managers β€” TV Manager for the TVs and IoT Manager for the room devices β€” and the steps below say which screen to use. You need the Devices area β€” see Areas and roles. For the steps on site, see TV Installation.

The steps

  1. Create the rooms β€” Settings β†’ Property β†’ Rooms & floors.
  2. Define the default TV preset β€” TV Manager β†’ TV Presets: the IDCAP settings a TV should get. Create more than one if you have different kinds of TV.
  3. Install a test TV and a test room. Register one TV (TV Manager β†’ TVs) and give its room the preset. For the room's devices, scan SE with IoT Manager β†’ Provisioning β†’ Discovery and apply what it finds.
  4. Test in detail, then save. Try everything on the TV and in IoT Manager β†’ Live rooms. When the room is right, save its devices as a Room Template. (A TV preset is already saved β€” it is the preset you tuned.)
  5. Install the other rooms β€” give the preset to their rooms (TV Presets β†’ Rooms), and Roll out the room template to them.
  6. A different kind of TV or room β€” make another preset or template (a copy of the first is the quickest start) and repeat steps 2–5.
  7. Test in bulk and keep watching β€” TV Status and the Dashboard's Room checks every 15 minutes, the Batch test button in each room, and Device status (test reports) when something goes wrong.
  8. Operate β€” Guest Operations β†’ Rooms, to control one room's TV and devices.

Presets and templates can be copied from another site you manage, so a second hotel does not start from zero.